ROLLER SHUTTER DOORS
Did you know that garaging your car in winter does more harm than good to it? Icy snow with road salt is not a threat to the car body, as long as it is frozen. However, a car that thaws several times a day - is constantly in contact with a deadly mixture of water and salt for metal. Therefore, if you have a detached garage, or with an additional entrance door to your house, it is worth thinking about a roller shutter door. It provides you with enough warmth to comfortably get out of the car, but also the temperature does not allow the rapid thawing of salty snow on the chassis.
An additional advantage of the gate is its lightweight construction, which allows it to be easily opened even without an optional electric motor, as well as the absolutely minimum amount of space required for its opening: the gate consists of horizontal segments of several centimetres' height, which, during opening, wind on a roller located under the ceiling just above the entrance: therefore, the gate does not require neither snow-covered space in front of the garage, as a swing gate, nor does it take up half a metre of space under the entire ceiling, as a tilt or sectional one does.
IN ROLLER SHUTTER GATES COMFORT BECOMES A STANDARD
All roller shutter doors are equipped with a drive as standard.
The door curtain winds up on a winding shaft hidden in the box, thus saving space under the ceiling.
Characteristics:
curtain made of aluminium profiles filled with CFC-free polyurethane foam
at the bottom edge of the profile a chambered rubber seal is mounted, which adheres to the ground
the curtain moves along aluminium vertical guides and winds up on a winding shaft
aluminium guides mounted along side edges of opening
guides equipped with brush seals
tubular actuator mounted in the winding shaft
FUNCTIONALITY AND SAFETY
Now, the space saved under the ceiling may be arranged as you wish: to mount lights, hang skis and a car trunk. Interior lighting and energy saving in a dark room (e.g. in a garage without windows) can be obtained by mounting in the gate the profiles with glazing. The lower chamber seal, brush seals in the guides and a seal screwed to the lintel guarantee good insulation.
1.The curtain blockade in the BR-77s door prevents the curtain from being lifted from the outside.
2.Safety of use is ensured by photocells and an edge safety strip. In case of an obstacle the door curtain retracts to the open position.
3.Creels provide distance between the profiles when the door curtain is rolled up, so that the door operates quietly and the life of the panels is considerably extended.
4.Emergency opening from the inside in the event of a power failure the door can be opened manually using a crank in door (A) BR-77s and in doors (B) BR-77 E and BR-100 E.
5.Emergency opening from the outside using a special crank is used if there is no additional entrance to the garage.
6.Two types of profiles - 77 and 100 mm
THE ROLLER SHUTTER DOOR IS THE ONLY DOOR WITH AN ELECTRIC DRIVE INCLUDED IN THE PACKAGE
OPTIONS ADAPTED TO YOUR NEEDS
Depending on the installation conditions, three types of roller shutter doors are available
ROLLER SHUTTER DOOR BR-77 E
The gate is equipped with a newo shaft cover.
HROLLER GATE BR-77 s
The gate is equipped with a newborn shaft housing, which is located on the perimeter of the shaft.
GATE PATTERNS
ROLLER SHUTTER DOOR BR-100 E
The door is equipped with a newton shaft cover.
BR-77 GATES
BR-77 door (example of glazing)
BR-77 door with ventilated profile
Additional information
Colors
